How to Remove Gel Polish? | Pink Gellac (2025)

Step 1: File off the Top Coat

Use the 100/180 grit Nail File to file the Top Coat off the nail. We recommend using the coarsest side to do this, using a left-to-right motion. Ensure that the entire nail has a kind of matte look. This first step makes sure the remover can dissolve the rest of the gel polish. Do not forget!

Step 2: Apply remover and wrap with aluminum foil

Put some Remover on a Nail Wipe. Place the wipe on the nail and wrap your fingertip tightly in a piece of aluminium foil or Remover Wrap. Leave to soak for about 10 minutes.

Step 3: Remove gel polish with a tool

When the gel polish is dissolved by the remover, it can be easily removed with an Orange Woodstick or a Cuticle Pusher. Use the tool gently to remove the leftover gel polish. Don’t press too hard to prevent nail damage.

Step 4: Aftercare

Applying Cuticle Oil is a good way to keep your nails healthy. Keep in mind that gel polish won’t adhere to oiliness. Wait at least one hour before you do your next manicure. Do you want to reapply gel polish to your nails immediately after removal? Please skip this step and only apply Cuticle Oil after you’re next gel polish manicure is done.

Are the above steps a bit too much, do you find removing gel polish too time-consuming or do you want to change gelcolour frequently? Don’t worry, we got you! With the Pink GellacPeel Base, removing gel polish is a piece of cake. No remover needed and no soaking off your nails. Thanks to this bad boy you can remove the polish from your nails within 1-2 minutes. Just peel it off and you’re done!

• Start by gently loosening a corner of the gel polish at the base of your nail using an Orange Woodstick or Cuticle Pusher.
• Optionally, you can apply a little Cuticle Oil between your gel polish and your nail. This way, the gel polish comes off more easily and it is even more gentle for your nails.
• The gel polish is now easy to remove from your nails. Ready to apply a new colour!

Tip:Before you start, treat your hands to a relaxing bath with lukewarm water and a touch of Cuticle Oil. This makes removing your manicure even easier! Do you want to know more about the Peel Base? Discover everything about our Peel Base.

If you use theRubber Base, you can also choose to completely file it down:

• Take a 100/180 grit file and carefully file away until the top layer of the Rubber Base with the 100 grit side. When doing this, be careful not to include the natural nail, i.e. the part that had already grown out. Make sure you keep the curvature, so don't file away too much product.
• With the 180 grit side you file the sides of your nails vertically, giving your nails the desired shape and length. Make sure that the surface of the Rubber Base becomes even. Do you notice pieces of Rubber Base coming off while filing? Then remove it completely. Your goal is to get a perfectly even nail, without irregularities.
• Wipe away the dust with the Manicure Brush and give the natural nail, the grown part, a light buff with a buffing block.